24" x 36"
Acudor’s DW-5040 Access Doors are specifically designed for applications where the drywall has already been installed. The door flange comes perforated as a taping bead with pre-punchedholes. Drywall compound is applied over the beading at the same time as the drywall joints are filled to leave you with only the door remaining exposed. The Doors come with a concealed hinge and a screwdriver operated cam latch to allow the door panel to open freely with no bingding, sagging, or distortion.$30.00 – $200.00Select options
The Aluminum Access Doors are designed to provide access in walls and ceilings while maintaining an invisible, architecturally pleasing appearance. The doors come with a standard touch latch feature so there is no visible lock and accomodated 5/8″ so the they can be blended in perfectly with the existing drywall.$94.00 – $200.00Select options
These Metal Access Doors are approved by Underwriter’s Labratories (UL) for 1 1/2″ Hours “B” Label in Walls and ULC for 2 Hours “B” Label in Walls. They are designed to maintain continuity in a 2-Hour Fire Barrier wall. The doors should be used whenever you need access in a fire rated wall where temperature rise is not a factor.$96.00 – $222.70Select options
These Fire Rated Metal Access Doors are approved for use in both walls and ceilings. For walls, this door has an Underwriters Laboratories (UL and ULC) 1 1/2″ Hour Rating “B” Label with a maximum temperature of 250 degrees after 30 minutes. They should be used where Fire Rating is needed and temperature rise or heat transmission is a factor. For Ceilings, this door has been approved by Warnock Hersey International for a 3 Hour Fire Rating.
The doors comes standard in prime-coated with a Knurled Knob and Flush Key lock. They also come standard with 2″ thick fiberglass insulation in the back of the center door panel.$133.10 – $316.80Select options