Please give us a call to talk with our staff professionals that has over 30 years experience.
ISC Supply, N5619 Luey Lane, Plymouth, WI 53073, USA
888-782-5011
Monday - Friday: 08.00-20.00 Saturday: 09.00-15.00 Sunday: closed
These Metal Access Doors are approved by Underwriter’s Labratories (UL) for 1 1/2″ Hours “B” Label in Walls and ULC for 2 Hours “B” Label in Walls. They are designed to maintain continuity in a 2-Hour Fire Barrier wall. The doors should be used whenever you need access in a fire rated wall where temperature rise is not a factor.
$96.00 – $222.70
These Metal Access Doors are approved by Underwriter’s Labratories (UL) for 1 1/2″ Hours “B” Label in Walls and ULC for 2 Hours “B” Label in Walls. They are designed to maintain continuity in a 2-Hour Fire Barrier wall. The doors should be used whenever you need access in a fire rated wall where temperature rise is not a factor.
| Access Opening | 12" x 12", 16" x 16", 18" x 18", 22" x 30", 22" x 36", 24" x 24", 24" x 36", 8" x 8" |
|---|
You must be logged in to post a review.
Designed for both wall and ceiling applications, the hinged Stylemark Panel can be used where a locked door is needed but style is still maintained. The hinged panel is great for use in ceiling applications where there is no space to push a door up and in wall applications when access to plumbing and electrical is needed.
The Stylemark Hinged Access Panel consists of a frame and door with concealed hinges and a key lock.
Acudor UF-5500 Metal Access Doors are the most universal and economic metal door. They are available in a wide variety of sizes and can be used for either walls or ceilings. The drawn flanged door panel has rounded corners for both safety and an architecturally pleasing appearance. The frame is drawn from one piece to provide excellent strength and rigidity.
The Doors are made from Galvanized Steel and are coated with a white baked polyester powder paint so it will perform in both high corrosive and exterior environments. In addition they come standard with concealed hinges and a smal lock that can be opend with any flathead screwdriver. Available with a key lock upon special request.
These Fire Rated Metal Access Doors are approved for use in both walls and ceilings. For walls, this door has an Underwriters Laboratories (UL and ULC) 1 1/2″ Hour Rating “B” Label with a maximum temperature of 250 degrees after 30 minutes. They should be used where Fire Rating is needed and temperature rise or heat transmission is a factor. For Ceilings, this door has been approved by Warnock Hersey International for a 3 Hour Fire Rating.
The doors comes standard in prime-coated with a Knurled Knob and Flush Key lock. They also come standard with 2″ thick fiberglass insulation in the back of the center door panel.
Stylemark Drywall Access Doors are made from glass fiber reinforced gypum. The doors are aesthetically pleasing because they blend seamlessly into a drywall ceiling. No longer do you have to hide your attic and utility access in the closet. In addition, the Access Doors can be used in both residential and commercial applications.
Stylemark panels are perfect for jobs where access is required at regular intervals. In addition, they can be used for both new construction and retrofit applications. The unit consists of a surround frame with pre-drilled fastener holes and a drop in door.
Stylemark Doors are now available in GFRC (Glass Fiber Reinforced Cement) for Exterior Applications!! Applications include exterior soffits, porte-cochere, covered drive-ups, and any other exterior location that requires access above. Contact us for more information!
Acudor’s DW-5040 Access Doors are specifically designed for applications where the drywall has already been installed. The door flange comes perforated as a taping bead with pre-punchedholes. Drywall compound is applied over the beading at the same time as the drywall joints are filled to leave you with only the door remaining exposed. The Doors come with a concealed hinge and a screwdriver operated cam latch to allow the door panel to open freely with no bingding, sagging, or distortion.
The Aluminum Access Doors are designed to provide access in walls and ceilings while maintaining an invisible, architecturally pleasing appearance. The doors come with a standard touch latch feature so there is no visible lock and accomodated 5/8″ so the they can be blended in perfectly with the existing drywall.
Reviews
There are no reviews yet.