Totally Smooth PVC Finish – Washable on Both sides
Duroglas Plus PVC Ceiling Panels are the perfect solution for Clean Room and High Humidty environments. They are made from a Rigid PVC (2×2 – 5/32″ Thick, 2×4 – 3/16″ Thick) and available in a variety of finishes to fit every job. They are guaranteed not sag, bow, or warp and they can even be removed for power washing.
Duroglas Plus Panels work with for any traditional 15/16″ lay-in Ceiling grid. They are Class A Fire Rated and USDA Approved for use in food processing plants, restaurants, kitchens, and anywhere else.
These Metal Access Doors are approved by Underwriter’s Labratories (UL) for 1 1/2″ Hours “B” Label in Walls and ULC for 2 Hours “B” Label in Walls. They are designed to maintain continuity in a 2-Hour Fire Barrier wall. The doors should be used whenever you need access in a fire rated wall where temperature rise is not a factor.
The Aluminum Access Doors are designed to provide access in walls and ceilings while maintaining an invisible, architecturally pleasing appearance. The doors come with a standard touch latch feature so there is no visible lock and accomodated 5/8″ so the they can be blended in perfectly with the existing drywall.
These Fire Rated Metal Access Doors are approved for use in both walls and ceilings. For walls, this door has an Underwriters Laboratories (UL and ULC) 1 1/2″ Hour Rating “B” Label with a maximum temperature of 250 degrees after 30 minutes. They should be used where Fire Rating is needed and temperature rise or heat transmission is a factor. For Ceilings, this door has been approved by Warnock Hersey International for a 3 Hour Fire Rating.
The doors comes standard in prime-coated with a Knurled Knob and Flush Key lock. They also come standard with 2″ thick fiberglass insulation in the back of the center door panel.
Acudor’s DW-5040 Access Doors are specifically designed for applications where the drywall has already been installed. The door flange comes perforated as a taping bead with pre-punchedholes. Drywall compound is applied over the beading at the same time as the drywall joints are filled to leave you with only the door remaining exposed. The Doors come with a concealed hinge and a screwdriver operated cam latch to allow the door panel to open freely with no bingding, sagging, or distortion.
Acudor UF-5500 Metal Access Doors are the most universal and economic metal door. They are available in a wide variety of sizes and can be used for either walls or ceilings. The drawn flanged door panel has rounded corners for both safety and an architecturally pleasing appearance. The frame is drawn from one piece to provide excellent strength and rigidity.
The Doors are made from Galvanized Steel and are coated with a white baked polyester powder paint so it will perform in both high corrosive and exterior environments. In addition they come standard with concealed hinges and a smal lock that can be opend with any flathead screwdriver. Available with a key lock upon special request.
Designed for both wall and ceiling applications, the hinged Stylemark Panel can be used where a locked door is needed but style is still maintained. The hinged panel is great for use in ceiling applications where there is no space to push a door up and in wall applications when access to plumbing and electrical is needed.
The Stylemark Hinged Access Panel consists of a frame and door with concealed hinges and a key lock.
Stylemark Round Drywall Ceiling Access Doors complement any design. The innovative round Stylemark Access Panel is made of GFRG (glass fiber reinforced gypsum). They are designed to blend seamlessly into a drywall ceiling when circular light fixtures, speakers, or smoke detectors are being used to maintain an aesthetic theme in design.
Stylemark Drywall Access Doors are made from glass fiber reinforced gypum. The doors are aesthetically pleasing because they blend seamlessly into a drywall ceiling. No longer do you have to hide your attic and utility access in the closet. In addition, the Access Doors can be used in both residential and commercial applications.
Stylemark panels are perfect for jobs where access is required at regular intervals. In addition, they can be used for both new construction and retrofit applications. The unit consists of a surround frame with pre-drilled fastener holes and a drop in door.
Stylemark Doors are now available in GFRC (Glass Fiber Reinforced Cement) for Exterior Applications!! Applications include exterior soffits, porte-cochere, covered drive-ups, and any other exterior location that requires access above. Contact us for more information!
Insulating Fiberglass Ceiling Tiles are the perfect solution for jobs that require a lay-in ceiling panel with access above and high R-Value. They are made from a rigid 3″ thick fiberglass with a thin vinyl laminated to the face providing a stellar NRC value for noise absorption in the room and a fantastic R-Value for insulation and noise blocking.
3″ Thick Lay-in Ceiling Panels – 2′ x 2′ or 2′ x 4′
Huge Labor Savings – No need to roll insulation behind the tiles!
Easy Access to Plenum Above and no worries about moving and putting back insulation behind the tiles
R-Value – 13.6 and NRC 1.00 – The best acoustical ceiling tiles on the market!
White or Black – Non-porous – Vinyl Facing – Easily Cleanable and Very durable
Special pricing available to people who can pick up the panels at our plant in Plymouth, WI – Contact us for details!
ISC Black Cinetile Matte ceiling tiles are made from different thickness of lightweight, semi-rigid 2-3 lb density fiberglass with a non-woven Matte laminated to the face. The Matte facing is dyed black so there is no paint to chip over time and it is completely smooth with no sheen so you get a black ceiling panel that will blend in and look great.
In addition to looking great, the facing breathes so that with a 5/8″ Thick fiberglass you still achieve an NRC value of .75. For extreme situations, we can use 1″ fiberglass and achieve an NRC of .95.
Most importantly, our new 5/8″ Cinetile Matte as low as $1.40/SF is incredibly affordable for a black ceiling. There is simply nothing else in that price range that will provide acoustics and a black look. This makes it perfect for home theaters, restaurants, showrooms, retail stores, and virtually any ceiling where a black look is needed and you dont want to spend a ton of money.
ISC is proud to introduce our Echo Silencer Acoustical Ceiling and Wall Panels. These panels are made from lightweight fiberglass and come in 1′ x 2′ panels that are easy to handle and glue up. With simple liquid nails adhesive, these panels can be glued up to your ceilings or walls.
Our Most Economic Glue-Up Acoustical Panel
Painted White or Black Finish – Smooth Appearance
Perfect for Rooms with All Hard Surfaces and Drywall or Concrete Ceilings
Typical Coverage of 30-50% of you Ceiling is Enough to Quiet an Echo and Improve your Room’s Acoustics
In Stock at our Warehouse in Plymouth, WI – No Long Lead Times
Need Help? Just give us a call and we are happy to answer questions or make sure the product will work for you!